A power divider divides an incoming signal into two (or more) output signals. In the ideal case, a power divider can be considered loss-less, but in practice there is
An isolator is a type of non-reciprocal passive network that allows designers the freedom to construct networks where the transmission coefficient in one direction does not necessarily have the same
TX and RX filters select a specific portion of the RF or microwave signal based on the desired frequency, and reject the rest of the signal being transmitted or received.
A crossband coupler is a three-port network that allows transmitters and receivers of different frequency bands to share a single feedline to an antenna. It does this by using low-pass,
Any time there are RF or any electrical equipment out in the field, it’s going to be subject to a wide range of environmental factors. Extremes of temperature, wind-blown