50 OHM COAXIAL LOADS
Loads are supplied standard with N connectors, which are recommended above 500 MHz.
Please specify other types if required.
NOTES:
- Please specify exact operating frequency and special load requirements with order.
- Higher power handling available. Contact Telewave.io with requirements.
| MODEL (Click for Datasheet) | DESCRIPTION | FREQ.RANGE | CONNECTORS | POWER | MADE IN USA |
|---|---|---|---|---|---|
| TWL-01 | Port Termination | 0-2500 MHz | N-M, BNC-M | 250 Watts | YES |
| TWL-35 | Coaxial Dry Load | 0-1000 MHz | N-M, UHF-M | 35 Watts | YES |
| TWL-50 | Coaxial Dry Load | 0-2500 MHz | N-M/F, UHF-M/F (QC) | 50 Watts | YES |
| TWL-60 | Coaxial Dry Load | 0-1000 MHz | N-M, UHF-M | 60 Watts | YES |
| TWL-75 | Coaxial Dry Load | 0-2500 MHz | N, UHF M/F, DIN-F (QC) | 75 Watts | YES |
| TWL-100 | Coaxial Dry Load | 0-2500 MHz | N-M/F, UHF-M/F (QC) | 100 Watts | YES |
| TWL-100HS | High Standard Termination | 0-2500 MHz | N-M/F, UHF-M/F (QC) | 100 Watts | YES |
| TWL-100P | Panel Mount Coaxial Load | 0-2500 MHz | N-M/F, UHF-M/F (QC) | 100 Watts | YES |
| TWL-150 | Coaxial Dry Bench Load | 0-2500 MHz | N-M/F, UHF-M/F (QC) | 150 Watts | YES |
| TWL-300 | Coaxial Dry Bench Load | 0-1000 MHz | N-F | 300 Watts | YES |
| QUICK-CHANGE CONNECTORS FOR LOADS | |||||
| QCLDF | Quick Change Connector for Loads – DIN Female 1-1/4″ flange | ||||
| QCLNM | Quick Change Connector for Loads – N Male 1-1/4″ flange | ||||
| QCLNF | Quick Change Connector for Loads – N Female 1-1/4″ flange | ||||
| QCLSM | Quick Change Connector for Loads – UHF Male 1-1/4″ flange | ||||
| QCLSF | Quick Change Connector for Loads – UHF Female 1-1/4″ flange | ||||