TPRC-1405-2 Bandpass-Bandreject Cavity Filter 118-148 MHz


  • Dual Bandpass-Bandreject Cavity Filter
  • Frequency Range: 118-148 MHz
  • Insertion Loss: 1-4 dB
  • VSWR: 1.5:1
  • Cavity Diameter: 5″

Please add frequency range (MHz) in a message box below. If you order more than one unit and want to have a different frequency for each unit, please let us know the product quantity for each frequency in the message box below too.

Product Description

The Telewave TPRC-1405-2 Bandpass-Bandreject Cavity Filter 118-148 MHz, is 5” diameter, ¼-wavelength Pass-Reject cavity with an adjustable coupling loop and tuning capacitor. Pass-Reject cavities reject all frequencies outside a narrow pass band, with a tunable notch for additional protection with close spacing. These cavities are commonly used to reduce transmitter sideband noise, and protect receivers against desensitization.

TPRC-1405 cavities cover 118-148 MHz. All cavities are tuned to specified frequencies prior to shipping, and no further adjustments should be required. The positive locking mechanism allows for quick field re-tuning if frequency changes become necessary.

These cavities feature calibrated adjustable coupling, and insertion loss can be easily set from 1 dB to 4 dB or more to improve selectivity. This allows cavity response to be optimized for any operating environment. At densely populated sites, the TPRC-1405-2 dual cavity filter provides greater selectivity with minimum insertion loss. Multiple cavities can also provide a wider passband when required. Mounting rails are provided for all multiple-cavity filters.

Excellent frequency stability is achieved by the use of a specially machined compensator and Invar rod. The pass and reject frequencies are temperature stable from -30°C to +70°C. Telewave Ground Loop technology places the center conductor of each coupling loop at DC ground potential for lightning protection and noise reduction.

Heavy duty materials are used throughout each cavity to insure high performance and long life. Cavity top plates are machined from ¼ -inch aluminum, and are heliarc welded to the cavity body at the high current point for improved conductivity and strength. This allows Telewave cavities to handle up to 350 watts, depending on insertion loss.

Rigid foam inserts support the tuner assembly allowing vertical or horizontal mounting. Similar metals and alodined aluminum help prevent galvanic corrosion. Silver plated tuners and beryllium copper finger stock provide non-corrosive low loss contact, and ensure reliable, long-term performance.

Download Data Sheet



Contact Telewave Sales for current lead time and shipping information: / 800-331-3396 Opt 1

Contact Telewave Sales for current lead time and shipping information: / 800-331-3396 Opt 1

You may also like…