Systems Engineering Request Click here to download our System Engineering Request Form Company Name:* Request Date:* Company Website: Referred to us by: Contact Name:* First Quote Require Date Contact Phone:* Expect Order Date: Contact Email:* End User / Project: Describe or draw the Requested System (attach supporting drawings or docs if needed) Check if Yes System to be Expanded? Yes Indicate known expansion frequencies in the table below. Trunked System? Yes Trunk System Type: Digital Modulation? Yes Modulation Type: Radio Type Transceiver? Yes TX PWR Monitor Needed? Yes Please describe your requirements again at the bottom of the page. TX Power Alarm Needed? Yes Please describe your requirements again at the bottom of the page. RX Preamplifier Needed? Yes Power (12/24/48vdc - 115/220vac): Desired Pre-Amp type / gain / NF: Antenna/s Needed? Yes Please describe your requirements again at the bottom of the page. Antenna Duplexed? Yes Rack/s – Cabinet needed? Yes Open/Enclosed: Height Inch: Rack space required for some horizontally mounted VHF/UHF cavities is 30” to the back, 6” to the front. Cavities for frequencies below 108 MHz must be mounted vertically inside a rack or mounted externally. Default Rack width for horizontal mount 10 inch cavities is now 19 inches. The 24 inch rack is obsolete. System Frequencies Use / Name / Description / Etc. Duty Cycle % TX (Watts) TX Freq.(MHz) RX Freq.(MHz) Indicate frequencies that are alternates, optional or are for possible expansion. Describe any additional information that would help us to design your project. such as: - Any existing/needed antenna configuration (type, pattern, gain, physical separation Horz/Vert) - Any local high power TV/FM broadcast, Paging, NOAA weather, etc. transmitters (Freq & Power) Please upload any additional information that would help us design your project. Drop files here or Accepted file types: pdf, png, doc, docx, pdf, txt, gif.